AJ Striker has left us some treasure inPinewood Computer Coreduring Week 1 of Metaverse Champions. Find out how to get AJ Striker’s Crate Drop (available April 14 to April 22) below.

How to get AJ Striker’s Crate Drop in Pinewood Computer Core

One important thing to know about this quest is that it takes a lot of time to complete. However, there isn’t any competition with other players, so it’s fairly easy. The primary goal is to overheat the facility, which can take over 45 minutes. To join a game, use the following link:Pinewood Computer Core.

When you join the game, go to the Main Lobby and approach AJ Striker. He will give you the task of causing a Meltdown in the facility. The best way to do this is to do the following:

AJ Striker in Pinewood.

After speaking to AJ, you can enter the facility through the door behind him. Follow the steps upstairs and use the elevator located here to go down. On the floor, you will see colored lines that show you how to get to different parts of the facility.

Related:How to get AJ Striker’s Crate Drop in Manhunt | Roblox Metaverse Champions - Pro Game Guides

Talking to AJ in PInewood.

Before you begin:It’s important to note that most matches end with the facility overheating, even if you did nothing. This is because other players are sabotaging it. If you join a match, you’re able to just interact with AJ to start the quest, then wait for other players to Meltdown the facility. If you want to take part, use the images below to see how to complete the steps listed above.

When you complete all the actions above, the temperature of the facility will quickly begin to rise. Once it reaches about 4,000 degrees, the facility will start to shake and Meltdown.

Article image

Shortly after the facility melts down, you will be rewarded with the badge and AJ’s Drop Crate!

Forall Metaverse Champions Mission Guides, be sure to check back with Pro Game Guides. If you’re looking for codes for other games, we have a ton of them in ourRoblox Game Codespost! You can also get a bunch of free stuff via ourRoblox Promo Codespage.

The fan control room is a small room near the room with large fans in the ceiling. If they aren’t spinning, leave it that way. If the fans are active, press the buttons on the control panel until they’re red to turn them off.

The Coolant Pipeline can be broken. This makes it so coolant does not get into the core, which makes it overheat much faster.

Find the Reactor Core room and put on the suit shown in the image. If you don’t do this, you won’t be able to go down to the core to turn on the lasers and overheat it. Once you have the suit, jump down to the core room below and open the access hatches to go in.

When you’re in the core room, the lasers must be on. Press all buttons in the room until they are green to turn on the lasers and generate heat. After you do this, jump down to the reactive core below and follow the red hallway until you reach the end.

At the end of the red hallways, you will find the Reactor Power control panel defaulted at one. Change it to four. This makes the facility overheat much faster.

Reset your character and return to the area with the colored lines. Follow the teal line to the coolant control room. When you get there, press the button until it is red and the coolant tanks are inactive.

After you do this, return to the colored lines on the floor and follow the yellow one again to the admin control room. From here, you can see all the information about the facility. Ideally, the Coolant and all the fans will be inactive, the Reactor Boost Lasers will be engaged, and the Reactor Power will be Unstable.